Business cards for print in Canada: size, bleed and the PDF the print shop accepts
The standard Canadian business card is 3.5 × 2 inches (89 × 51 mm). Here is the bleed, safe zone, resolution and PDF settings a Canadian print shop expects — and how to get all of it from your phone.
Last updated:
A business card is the smallest thing you will ever print and the one that most often comes back from the print shop with a note. The design is rarely the problem. The file is: the wrong size, no bleed, text too close to the edge, RGB colours that print dull, a font that went missing. This guide covers each of those for Canada, in the order a print shop checks them.
The standard Canadian business card size
The standard business card in Canada is 3.5 × 2 inches (89 × 51 mm), landscape, the same as in the United States. Canadian print shops quote in inches for the trim size and in millimetres for the bleed; both appear in this guide. If a print shop's order form says "standard size", this is what it means.
| Region | Size | With 0.125 in / 3 mm bleed |
|---|---|---|
| Canada, United States | 3.5 × 2 in (89 × 51 mm) | 3.75 × 2.25 in (95 × 57 mm) |
| United Kingdom, Ireland, France, most of Europe | 85 × 55 mm (3.35 × 2.17 in) | 91 × 61 mm |
| Germany, Poland, Austria | 90 × 50 mm | 96 × 56 mm |
| Australia, New Zealand | 90 × 55 mm | 96 × 61 mm |
| Japan | 91 × 55 mm | 97 × 61 mm |
| Square | 2.5 × 2.5 in | 2.75 × 2.75 in |
Portrait cards are the same sheet turned 90 degrees; nothing changes for the print shop. Rounded corners are a finishing option (usually a 1/8 or 1/4 inch radius) and do not change the file. Square and slim cards (3.5 × 1.5 inches) exist but cost more because they need a separate cutting die, and they do not fit a standard card holder.
One rule to remember: design at the trim size, add bleed on all four sides, keep everything important 0.125 inch (3 mm) inside the trim.
Bleed, trim and the safe zone
Three lines matter in a print file, from the outside in:
- Bleed line: 0.125 inch (3 mm) outside the trim. Backgrounds, photos and any colour that touches the edge must extend to this line. The press prints a larger sheet and the card is cut out of it; the cut can land anywhere within about a millimetre of the trim line, so the bleed is what keeps the edge solid.
- Trim line: the final 3.5 × 2 inch edge of the card. This is where the blade aims.
- Safe zone: 0.125 inch inside the trim. Text, logos, phone numbers and anything you would be upset to lose stay inside this line. A phone number that ends a millimetre from the edge looks fine on screen and loses its last digit on one card in twenty.
So a file with bleed measures 3.75 × 2.25 inches, and the live area for text is 3.25 × 1.75 inches. If the design has a white background and nothing touches the edge, you can skip bleed, but the safe zone still applies.
Resolution: 300 dpi for images, vector for everything else
Print shops ask for 300 dpi (dots per inch) at the final size. For a 3.5 × 2 inch card that is 1050 × 600 pixels; with bleed, 1125 × 675 pixels. A logo saved from a website at 400 pixels wide will print visibly soft. A phone photo (usually 3000–4000 pixels wide) is more than enough.
Resolution only applies to photos and other raster images. Text, lines, shapes and a logo built from shapes should be vector: described as curves, not pixels, so they stay perfectly sharp at any size. A PDF keeps vectors as vectors; a PNG or JPG flattens everything into pixels, which is why a print shop prefers the PDF even when it accepts both.
CMYK, not RGB
Screens make colour with red, green and blue light (RGB). Presses mix cyan, magenta, yellow and black ink (CMYK). The CMYK range is smaller: pure RGB blue, bright orange, lime green and hot pink cannot be reproduced and come out duller.
If you send an RGB file, the print shop converts it and you see the result when the box arrives. If you convert to CMYK before exporting, you see the shift on screen while you can still adjust. Two practical rules:
- Rich black for large areas: a background of 100% K alone prints as dark grey. Print shops use "rich black", for example C 60 / M 40 / Y 40 / K 100, for solid areas. Small text stays 100% K only, otherwise the four inks misregister and the letters get coloured fringes.
- Avoid tiny text in light colours or reversed out of a photo. Below about 6 pt, knockout text fills in.
Black-and-white designs, one-colour cards and anything in greys are unaffected by all of this and are the cheapest to print.
Fonts: embed or convert to outlines
The classic surprise: the card arrives in Arial because the font you chose was not on the print shop's computer. Two fixes exist. Embedding packs the font inside the PDF. Converting to outlines turns every letter into a shape, so no font is needed at all. Outlines are the safer option for a business card, where nobody needs to edit the text after export.
Minimum readable sizes on a card: 7–8 pt for a phone number or e-mail, 6 pt for a legal line, 10–12 pt for the name. On an uncoated stock go one size larger: ink spreads a little into the paper. A bilingual card (English and French) needs the same discipline twice: two short blocks beat one crowded one, and a two-sided card with one language per side is the cleanest solution.
What goes on a business card
A card that works has four things and stops there: who you are (name and role), what you do (business name, one line of what you offer), how to reach you (one phone number, one e-mail, one web address) and a visual anchor (the logo or a strong colour). A QR code to your website, menu or booking page is worth the space; a QR code to a PDF of the same card is not.
Two-sided cards cost little more than one-sided and give you a clean front (logo, name) and a working back (contacts, services, QR code, or the French side). If the back is a solid brand colour, it needs bleed on all four sides.
Paper stock and finish
Canadian print shops quote stock in points (pt), the thickness in thousandths of an inch, and sometimes in gsm:
| Stock | Feel | Typical use |
|---|---|---|
| 14 pt gloss or matte (~350 gsm) | standard, slightly flexible | most cards, best price |
| 16 pt (~400 gsm) | noticeably stiffer | the usual upgrade |
| 18–24 pt uncoated | thick, natural, writable | lawyers, consultants, craft brands |
| 32 pt, triple-layer | rigid, with a coloured core | luxury, real estate, design studios |
Finishes: matte is easy to read and write on; gloss makes photos vivid but shows fingerprints; soft-touch laminate feels like velvet and costs more; spot UV puts gloss on one element (a logo) over a matte card. A finish is ordered, not designed, with one exception: spot UV and foil need a separate "mask" file showing where they go.
The export checklist
Before you upload the file, check:
- Size 3.5 × 2 inches plus 0.125 inch bleed on every side (3.75 × 2.25 inches total).
- Everything important at least 0.125 inch inside the trim.
- Photos and logos at 300 dpi at final size.
- Colours in CMYK, solid backgrounds in rich black, small text in 100% K.
- Fonts embedded or converted to outlines.
- One PDF page per side, crop marks on, no printer's marks inside the bleed.
- Spelling of the phone number and e-mail checked by someone else, in both languages if the card is bilingual.
Doing all of this on your phone
OlingoPrint sets the North American business card to 3.5 × 2 inches with bleed and safe zone already drawn, so you cannot put a phone number too close to the edge without the assistant saying so. You pick a template for your trade (a plumber, a salon, a realtor, a café), change the text and the photo with one finger, turn the card in 3D to check the back, and export a PDF with 0.125 inch bleed, crop marks, CMYK colour and text converted to outlines. The free version adds a watermark; Pro removes it.
That PDF is what the print shop asks for. Upload it to any online printer or walk it into a local shop, and it prints the first time.
Frequently asked questions
What size is a standard business card in Canada?
3.5 × 2 inches, which is 89 × 51 mm, the same as in the United States. With bleed the file is 3.75 × 2.25 inches (95 × 57 mm): an extra 0.125 inch (3 mm) on every side that gets trimmed off. The UK and most of Europe use 85 × 55 mm.
What is bleed and do I really need it?
Bleed is the 0.125 inch (3 mm) of background that extends past the trim line. Cutting is never perfectly exact, so without bleed a hairline of white can appear along the edge. Any design with a coloured background or a photo that touches the edge needs it. A white card with content in the middle does not.
What resolution should a business card have?
300 dpi at final size for photos and logos. At 3.5 × 2 inches that is 1050 × 600 pixels, plus bleed 1125 × 675. Text, lines and shapes should be vector, so they stay sharp at any size.
CMYK or RGB for business cards?
CMYK. Printing presses mix cyan, magenta, yellow and black; a file in RGB gets converted at the print shop and bright blues, oranges and greens shift. Converting on your side, before you send the file, lets you see what you will get.
What file format does the print shop want?
A PDF with bleed, crop marks and fonts embedded or converted to outlines, one page per side. PNG or JPG are accepted by some online printers but any text in them is a raster image and prints softer.
How thick should the card stock be?
14 pt or 16 pt cover stock is the standard in Canada (about 350–400 gsm). 18 pt and thicker feel premium; 32 pt and triple-layer cards cost two to three times more. Matte or uncoated stock is easier to write on; gloss makes photos pop.
Can I make a print-ready business card on my phone?
Yes. OlingoPrint has the 3.5 × 2 inch size with bleed and safe zone already set, converts text to outlines, exports CMYK and adds crop marks. You pick a template, change the text and export a PDF the print shop accepts the first time.

