Boxes and packaging: dielines, board, bleed and a file the press can cut
What a dieline is, how to size a box to your product and the board, which panels print and which fold, and the PDF an Indian packaging printer expects — with a 3D preview before you order.
Last updated:
Packaging is the hardest thing a small business prints, for one reason: the file is not a flat page. It is a drawing of a box that has to be cut, creased, folded and glued, and every panel has to end up where you expected, with the logo the right way up. This guide explains the dieline, how to size a box, which board to pick and what the press needs, so the first box that arrives is the one you designed.
What a dieline is
A dieline (also "die line", "die layout" or "keyline") is the flat outline of the box before it is folded, drawn in two kinds of lines:
- Cut lines, usually solid: where the die cuts through the board.
- Crease or score lines, usually dashed: where the board is pressed so it folds cleanly.
Some templates add a third kind for perforations (tear strips) or glue areas. The dieline is placed in the file on its own layer, in a spot colour named something like "Dieline" or "CutContour", and set to overprint, so it sits on top of the artwork without knocking a hole in it. It is an instruction for the die maker and is never printed.
Most packaging printers will send you the dieline for the exact box style and size you order, as a PDF or a CorelDRAW or Illustrator file. The artwork is then placed on that template. If you design first and size later, the panels will not match and the press sends the file back.
Box styles a small business uses
| Style | Short name | How it closes | Typical products |
|---|---|---|---|
| Straight tuck end mono carton | STE | tuck flaps at both ends, same side | cosmetics, tea, soap, ayurvedic products, mobile accessories |
| Reverse tuck end mono carton | RTE | tuck flaps at both ends, opposite sides | the same, slightly cheaper to make |
| Crash-lock bottom | auto-lock | bottom locks itself when squeezed open | heavier items: candles, jars, bottles, sweets |
| Mailer box | FEFCO 0427 | a lid folded from the same sheet, locks with tabs | courier shipping, subscription boxes, gift hampers |
| Sleeve | – | an open band around a tray or product | soap, chocolate, dry fruit trays |
| Pillow box | – | curved ends fold in | small gifts, jewellery, wedding favours |
The mono carton with tuck flaps is the box you know from a cosmetics shelf: cheapest, easiest to fill by hand, prints on duplex or FBB. The crash-lock bottom costs a little more and holds weight without tape, which matters for sweets and jars. The mailer box is the e-commerce box: corrugated board, strong enough for courier handling, with the inside printable for an unboxing moment.
Sizing a box to the product
Box sizes are given as length × width × height of the inside, in that order, with the opening at the top. Three steps:
- Measure the product at its widest points. For a round jar, length and width are the diameter.
- Add clearance: 1.5 mm per side for a snug fit, 3 mm per side if the product goes in a pouch or wrap first. Too snug and the box bulges and the tuck flaps will not close; too loose and the product rattles.
- Add the board: the internal dimension is what you specify, but the board folds inside the panel, so each inner dimension grows by about one board thickness. For 0.5 mm board that is small; for E-flute corrugated (about 1.5 mm) it matters.
A 100 × 100 × 50 mm candle, snug fit, in 0.5 mm board: specify an inside of about 103 × 103 × 53 mm. A printer's quote form usually asks exactly for these three numbers plus the board, and generates the dieline from them.
Board and finish
| Board | Thickness | Feel | Use |
|---|---|---|---|
| Duplex grey-back, 300–350 gsm | ~0.4–0.5 mm | budget carton, grey inside | sweets, low-cost retail, inner cartons |
| FBB (folding box board), 300 gsm | ~0.4 mm | light white carton | light cosmetics, tea bags |
| FBB, 350 gsm | ~0.5 mm | the standard mono carton | cosmetics, food, candles |
| FBB, 450 gsm | ~0.6 mm | rigid carton | premium products, glass |
| Kraft board, 300–400 gsm | – | brown, natural, matte | handmade, organic, bakery |
| E-flute corrugated | ~1.5 mm | thin corrugated, prints well | mailer boxes, subscription boxes |
| 3-ply and 5-ply corrugated | 3–7 mm | strong, coarser print | courier shipping of heavier goods |
FBB is the white, smooth board that prints vivid colours; duplex is cheaper, grey on the inside, and prints a little duller. Kraft is unbleached and brown; white ink and black ink look best on it, and photos look muddy. Corrugated is for shipping; E-flute is the finest and the one that prints a logo cleanly, 3-ply is the usual courier box. Finishes are the same as for cards: gloss or matte lamination, velvet lamination, spot UV on a logo, foil. A laminate is worth it for anything handled a lot or stored in a humid room.
Artwork on a dieline: the rules
- Bleed 3 mm outside every cut line. Backgrounds and photos extend past the cut, the same as a pamphlet.
- The glue flap and tuck flaps print too. They are visible when the box is opened, and the glue flap edge shows at the seam. Carry the background colour onto them.
- Keep text 3 mm away from creases, not just from cuts. A crease catches ink and distorts anything crossing it. Each panel is its own page in your head: a headline stays inside one panel.
- Mind the orientation. On a flat dieline, two panels are upside down relative to the front. The 3D preview exists to catch exactly this.
- Barcodes go on a flat panel, never across a fold, at least 25 mm wide, in 100% black on a white or very light background, and need a quiet zone around them.
- Legal lines have minimum sizes in India: packaged goods need the MRP, net quantity, manufacturer's address, month and year of manufacture and customer care details under the Legal Metrology rules, and food adds the FSSAI number and the veg or non-veg mark. 6 pt is the usual floor, 8 pt is safer on board, and the rules set their own minimum heights by pack size.
- Colours in CMYK, large solids in rich black, no RGB. On kraft and duplex, ask for a proof: every colour darkens.
The file the press wants
One PDF, with:
- the artwork in CMYK, 300 dpi images, text converted to curves, on one layer;
- the dieline on a separate layer, as a spot colour named "Dieline" or "CutContour", set to overprint, exactly as the printer's template;
- 3 mm bleed, crop marks outside the bleed;
- for a mailer box, the inside print as a second page if the inside is printed.
Before the full run, order a physical proof or a single sample. A screen cannot show you how the board folds, how the tuck closes or how kraft swallows a colour. A sample costs a few hundred rupees and a week; a wrong run costs the whole order.
Doing all of this on your phone
OlingoPrint builds the dieline from your product's size and the board thickness, in the tuck end, crash-lock, mailer and sleeve styles, with bleed and the glue flap drawn. You put the artwork on each panel, then slide the box closed in 3D to see which panel ends up where and whether the logo faces the front. The export is a PDF with the cut and crease lines on their own layer in a spot colour, artwork in CMYK with text converted to curves, which is the file packaging printers ask for. Ready designs for candles, clothing, baked goods and cosmetics are included. The free version adds a watermark; Pro removes it.
Send that PDF to the press with the box size and board you chose, and ask for a sample first.
Frequently asked questions
What is a dieline?
A dieline is the flat drawing of a box before it is cut and folded: solid lines where the die cuts, dashed lines where the board is creased to fold. It sits in the file on a separate layer in a spot colour and is never printed; the artwork goes underneath it.
How do I size a box to my product?
Measure the product (length, width, height), add 1.5–3 mm of clearance per side so it slides in, then add the board thickness to the internal dimensions, because the board takes up space when folded. A 100 × 100 × 50 mm candle in 0.5 mm board needs an internal box of about 103 × 103 × 53 mm.
What is the most common box style for small products?
The mono carton with tuck flaps at both ends (straight tuck end, STE, or reverse tuck end, RTE): a rectangular box used for cosmetics, sweets, tea, soap, ayurvedic products and mobile accessories. For courier shipping, the mailer box (FEFCO 0427) with its own locking lid.
Which board should I choose?
For mono cartons, duplex or FBB (folding box board) at 300–450 gsm, roughly 0.4–0.6 mm: 350 gsm FBB is the usual choice for cosmetics and food, duplex grey-back is the budget option. For mailer boxes, E-flute corrugated (about 1.5 mm thick) prints well and protects the product. Kraft board gives a natural look and takes less ink.
Does a box need bleed?
Yes, 3 mm outside every cut line, and the artwork must also extend under the glue flap and the tuck flaps, which are visible when the box is opened. Keep text 3 mm inside each panel, away from the creases: the crease catches ink and a line of text across a fold always looks broken.
What file does a packaging printer want?
One PDF with the artwork in CMYK on one layer and the dieline on a separate layer in a spot colour named Dieline or CutContour, set to overprint, with 3 mm bleed and fonts converted to curves. Most printers send you their dieline template for the exact box; the artwork is placed on it.
Can I design a box on my phone?
Yes. OlingoPrint builds the dieline from your product's size and the board thickness, lets you put the artwork on each panel, folds the box in 3D so you see which panel faces which way, and exports a PDF with the cut and crease lines on their own layer.

